General Description

BlackStar BS-1 BlackStar BS-1 is intended for fixed or mobile objects monitoring and control. When external GPS receiver is connected, the device process and transmits positioning data.

Technical Specifications

Communication
GSM	E-GSM 900/DCS 1800 or E-GSM 900/DCS 1800-GPRS Class 10 GSM phase 2/2+ SMS Text mode Output performance: Class 4 (2 W) for EGSM 900 Class 1 (1 W) for EGSM 1800
Positioning
GPS receiver	External GPS receiver Interface: RS-232 NMEA 0183 messages: $GPRMC
Interfaces
Hardware	SIM card holder LED indication Inputs/Outputs: Inputs: 3 Outputs: 2 Power supply: Li Ion Battery External power supply 10...35 VDC Power consumption: 1 mA in sleep mode 120 mA average in operation mode
Phone	Communication protocol based on the open specification
Internet	Compatible with GEOFIX web service
States
Alarm	Alarm 1: Guard is on and Input 1 is activated Alarm 2: Guard is on and Input 2 is activated Alarm 3: Low power condition
Guard	On/Off
Physical Dimensions
Dimensions without connectors, W/D/H	80/60/20 mm
Weight	200 g
Firmware
Version number	2.00.11 Upgradeable via XModem

General Description

Expedition Device EXPEDITION is intended for monitoring of mobile objects. It is a monoblock unit. First time these devices were used for the race "EXPEDITION-TROPHY 2005" on the route MURMANSK - VLADIVOSTOK.

Technical Specifications

Communication
GSM	900/1800 MHz GSM module - Q2406B-IP GSM phase 2/2+ SMS/GPRS 3V SIM card interface Embedded GSM antenna
Positioning
GPS	GPS Receiver Trimble Embedded GPS antenna
Power supply
DC voltage	10...35 V
Power consumption	Average 40 mA, 12 V Maximum (transmission), 1 A
Additional parameters
Operation temperature	-20 ... +55 °C
Storage temperature	-30 ... +85 °C
Dimensions	100 x77 x 41mm. Power cable length ~ 30 cm
Weight	160 g
Firmware	Compatible with device BlackStar

Documentation

Firmware